2023 WOYO Motorcycle LED Controller For BMW R1200 R1250 F650 F750 F800 F850 F900 Control the Increased Light by Original Buttons

2023 WOYO MLC Module for BMW R1200 R1250 F650 F750 F800 F850 F900

Plug and Play Accessory Manager, Easy to install, DIY the spotlights you like

Control the increased brightness of spotlight by original switches of the motorcycle

Perfect For GR/Denali Spotlight

Before you purchase the order, please let us know:
Your Motorcycle Model with year (like: BMW FR50GS 2023), VIN
Take picture of the display screen or instrucment.

Description:
1.Based on the motorcycle’s CAN bus control system, utilize the original motorcycle switches to control new additional spotlights. Buttons such as scroll wheel, turn signal, horn, high beam, etc. can adjust the brightness and burst mode of the spotlights.

2. The lights will not operate when the motorcycle is not running.

3. Equipped with two adjustable lighting circuits: Main light*1, Auxiliary light*1.

    Plug-and-play design for easy installation.

4. Fashion DIY with different spotlight from your other Motorcycle people.

    Note: Depend on the type of spotlight and the connection method,

    please chat with our after-sales customer service before installation.

Note:

1. The total load power of the module cannot exceed 260W.

2. DWA & RDC Module Connect to the same position.

Perfect For GR/Denali Spotlight Assembly

(Pay attention for the dimming line model you need)

Note: If you need to connect to GR spotlight, please purchase with the GR extension cable.

(If you only purchase the MLC001/MLC002/MLC003 Module,

the package is not include the double GR extension cables.)

How to recognize the kind of dimming line?

1.Spotlight connects to power battery;

2.Turn on spotlight;

3.Use multimeter to test the voltage between the negative of the power battery and the dimming line.

If the voltage is close to the power battery voltage, it is "High level".

If the voltage is close to 0V, it is "Low level".

Before August 24, 2023, the default setting for the MLC Controller is high-level dimming,

directly compatible with GR brand spotlights.

How to change high-level to low-level dimming?

Open the side panel, Solder 2 solder joints together on the side.

Package list:

MLC module *1        
3P Connector*4

Black Stopper*12    
Male Female Crimp Terminal*12

(Don’t need adapter cable when you connect to Denali Spotlight)

Our conntroller doesn't support brake lamp,
support 2 sets spotlights (in total 4 lights).
If you choose "2pcs Extension cable for GR light" to purchase,
if you need to connect 4pcs light, please purchase double,
we will only send this kind cable without controller.

Cable Module:

1.Power Supply 12V Fuse 30A (Red-Positive Black-Negative)

2.CAN BUS Red/Black/Blue/Green (Male / Female 4P)

3.Lighting circuit No.1 Blue/white/black (3P) 90W *1

4.Lighting circuit No.2 Green/White/Black (3P) 150W *1

Lighting NO.1:

Blue---Spotlight Postive

White--- PWM Adjust Brightness Wire

Black---Spotlight Negative

 Lighting NO.2:

 Blue---Spotlight Postive

 White--- PWM Adjust Brightness Wire

 Black---Spotlight Negative

It support Auxiliary lights or Fog lights, not support Brake lights.

How to use MLC module connect to your motorcycle and light?

Function for BMW spotlights Intelligent Management Module:

1. Turn on the ignition lock- ----Start the spotlights module

2. Power up--- the spotlights self-test

3. Press the ignition switch ---Start the car

4. Long press the turn signal reset button for 2s---- Turn on the first set of spotlights.

5. Press the turn signal reset button 3 times within 2s---Turn on the second set of spotlights.

6. Roll the wheel forward ---- increase the spotlights brightness

7. Roll the wheel backward ----decrease the spotlights brightness

8. Push the wheel to the right way one time--- Enter left-right alternating flashing mode 1

9. Push the wheel to the right way again ---- Enter flash mode 2

10. Push it again, return to the constant light mode.

11. Press the horn ---- Synchronize the spotlights flash

12. Press the high beam button once --- synchronize the spotlights instant high brightness

13. Keep the high beam button on --- keep the spotlights synchronized high brightness

14. Turn on the left turn signal---The left spotlights will synchronously flash.

15. Turn on the right turn signal ---The right spotlights will synchronously flash.

16. Quickly press the turn signal reset button three times--- Turn off first set of spotlights.

17. Long press the turn signal reset button for 3 seconds--- Turn off Second set of spotlights.

18. Turn off the turn signal --- Reset to factory settings.

Support Motorcycle/ Bike Model for BMW list:
MLC001 (RDC Plug)

For BMW R-Series Module:

R1250R, R1250RS, R1250RT, R1250GS, R1250GSAdv

MLC002 (RDC Plug)

For BMW R-Series Module:

R1200R, R1200RS, R1200RT, R1200GS, R1200GSAdv

MLC003 (DWA Plug)

For BMW F-Series Module:

F750GS-K80, F650(2 CYL.) -K72, F800GS-K72,

F850GS-A2K81, F850GSAdv-K82, F900R-K, F900XR-K84